Diving into the oscilloscope

With the power supply repaired, the next item to go on the bench is the dead oscilloscope.

Hitachi V-1060 oscilloscope
Hitachi V-1060 oscilloscope

Undoing four screws on the sides of the scope let me slide the top cover off to reveal the innards.

Under the cover
Under the cover
Side view
Side view

The top circuit board looks to be the power supply board, and probably a few other things. Undoing a bunch of screws holding the top board down and a bit of fiddling around (discovered the board is on a hinge) let me lift it up to reveal more of the scope’s innards.

Beneath the power supply board
Beneath the power supply board
Beneath the power supply board
Beneath the power supply board
Power supply
Power supply

Three screws hold the cover of the power supply section.

Power supply
Power supply
Power supply
Power supply

A few dust bunnies inside, but overall everything looked to be in fairly decent condition (aside from not working).

First look around the inside didn’t reveal anything obviously wrong. No blown caps or scorched areas.  Whether this is something I’ll be able to repair or not is still up in the air. This scope is probably going to be spending a while on the bench.


Discover more from AB4UG Radioblog

Subscribe to get the latest posts sent to your email.