CW key collection: Begali Camelback

The Begali Camelback is the newest addition to my straight key collection. I had been wanting to get a Begali straight key for a while and finally got one at Hamcation last year.

Begali Camelback straight key
Begali Camelback straight key

If any company can lay claim to being the Cadillac of CW key makers, I’d say it would be Begali. The Camelback isn’t their most expensive key, but it’s still beautifully made and crafted. It’s a nicely designed key with a simple, elegant aesthetic. It is without question my favourite straight key in my collection to use.

The Camelback weighs in at a hefty 1.8 kg (4 lbs), by far the heaviest of anything in my collection. The weight means it’s not moving anywhere on my desk while I’m using it which is good because you definitely don’t want this thing sliding off your desk.

Begali Camelback straight key
Begali Camelback straight key

Two knobs at the rear of the key make it easy to adjust the contact spacing and spring tension to fit your preference.

Like most straight keys, it’s pretty simple and there’s not much to it. The wiring connections are made by soldering wires to terminals in a recessed channel at the bottom of the base. The cable is routed through the channel to the back and makes things nice and tidy.

Bottom view of the Begali Camelback showing the terminal connections and recessed channel for the cable
Bottom view of the Begali Camelback showing the terminal connections and recessed channel for the cable

It makes a satisfying thunk-y sound while I’m tapping out Morse code, as opposed to the more clacky sound that the J-38 makes. This is just a really comfortable key to use.

Practicing with the Begali

Got my Begali Camelback straight key wired up with a standard 3.5mm TRS cable, and made up an adapter cable to connect it to the Heathkit HD-10 keyer.

Morse code keys and bug connected to a Heathkit HD-10 electronic keyer

I’ve been really enjoying practicing Morse code with the Camelback. The solid, weighty base gives it a super stable feel and a nice satisfying thunk-y sound as opposed to the more clack-y sound from the J-38 key. I’m sure if I mounted the J-38 on a more solid base, it might also have a nice thunk-y-er sound. I’ll have to look around for something heavy to attach the J-38 to now.

The Camelback is hefty enough that it doesn’t move around while I’m keying. The Vibroplex bug is also pretty hefty, but will slide around a bit while I’m using it. I probably need to replace the feet or put some grippy pads on them to keep it from sliding around.

Orlando Hamcation 2023

This year’s edition of Hamcation was pretty good. Definitely seemed more crowded this year than last year, which was good to see. By the time I got there on the first day (about 20 minutes before the gates opened) the parking field was pretty much full. On the second day, they were sending people over to the overflow parking area by the time I got there when it opened.

Didn’t find quite as many things to purchase this year as I found last year, but did pick up a few nice things.

Begali had a table with a bunch of their keys and paddles on display. It was a very popular booth with lots of people stopping by to check things out and send out some Morse code. After stopping by the table a few times to play with the paddles, I decided on the last day of Hamcation to pick up one of their Camelback straight keys.

Begali Camelback straight key
Begali Camelback straight key

It’s a very nice straight key with a nice responsive action and a solid heavy base that’s not moving anywhere when I’m keying. Very happy with it. Just need to wire it up with a suitable cable now.

Out in the flea market/boneyard area, there were quite a few people with tables set out. Seemed like not quite as many as last year though.

An interesting item I found out in the boneyard was this board with an LCD display on it.

Gabotronics Xminilab oscilloscope module
Gabotronics Xminilab oscilloscope module

At first I thought it was just an LCD display module, so I bought it along with a couple ESP32 boards and a book for a few dollars. When I had a chance to take a closer look at it, I discovered that it wasn’t a display module at all, but a tiny little oscilloscope! Should be fun to get it running and see what it can do.

For the workbench, I found this arbitrary signal generator. I’ve been wanting to have one for the workbench for a while. Haven’t tried plugging it in and turning it on yet, so it might be a great addition, or it might become a project.

Pragmatic 2416A arbitrary waveform generator
Pragmatic 2416A arbitrary waveform generator

Looking forward to playing with my new acquisitions when I have some spare time.