Spent the afternoon today getting the coax from the entrance panel through the conduit and into the shack. On the first attempt the string I was pulling the coax with broke, so we had to pull some more string. One of the contractors that worked on the house told us a while back that if the string ever broke, tie a new string to a plastic grocery bag, stuff it into the conduit and use a vacuum at the other end to suck it through. Worked like a charm.
With the new string run, managed to get both of the lengths of coax (RG-8X I believe) I had used at the old house through the conduit. One is 75′ and the other is 100′ along with a few extra strings in case we want to pull some more coax. Based on what was left of the 75′ coax hanging outside the entrance panel, it looks like the run between the panel and the shack is around 60-65′. That means there’s a good bit of coax coiled up in the entrance panel right now.
Still a fair bit to do at the entrance panel. I have to decide if I want to trim it (which would mean I’d have to learn how to terminate coax) or leave it coiled up inside the box. Lightning arrestor needs to be mounted, and I’ll have to work out a grounding scheme. Then I need to figure out how to hold the antenna up in the air.
At the shack end, there’s enough sticking out that should make it easy to work with.
I think I’m going to drill a couple of holes in the wall plate for some short SO-239 bulkhead connectors. Then it will be short jumper cables from the radio to the wall.
One step closer to getting the shack back on the air.